Description
Our side sticker labeling machine or flat bottle labeler machine is applicable in industries where flat and oval shaped bottles are used for packing. It is compatible to handle bottles that are oval or flat in shape for which labels or stickers have to be pasted.
Automatic vertical linear sticker labeling machine model SBSL – 60 – oval is used for applying back, front or side labels on oval/flat/round/square shape containers with output up to 100 labels per minute depending on products size/shape and label size. Top holding belt system is synchronized with auto product alignment system. The built-in Advanced Micro Processor Control Label Dispensing system and operator friendly sensing system are very much useful for labelling and product packaging.Manual feeding, label length data storage in memory can be eliminated with the system built auto label length detection system. This also retrieves the same while changing label size and restarting of the machine. This machine can be supplied with optional toughened glass or acrylic safety cabinet.
Features
Unique Features:
- No Label Data Input/retrievals require for any Label Size
- No Change Parts for Label size, Feed Worm and Pocket System required for change in product size
- Single Pot On-line Speed Variation control
- Synchronized speed of Label Dispensing, Conveyor and Top Hold Belt System
- Virtually Maintenance free machine
- Easy to change label application height
- User Friendly Label Placing Adjustments
- Self Protected against Voltage Fluctuations
- Suitable for On-Line Inkjet and Contact Coding System
- Suitable for Partial, Full Wrap Around and Overlap Labelling
- Built In A.C. Variable Frequency Drive System.
- Fully Stainless Steel finish Machine
Optional Features:
- Label Roll Empty – Machine Stop System with Alarm
- Missing Label in Roll – Machine Stop System with Alarm
- Special Label Sensor for sensing Transparent Film Labels which does not have any sensing mark on it.
- Option of Contact Coder, Hot Foil Coder, HP Cartridge Coder and Inkjet Coder with various speed ranges available.
- Toughened Glass or Acrylic Safety Cabinet for Machine
- Tower Light showing the machine status / operation
- Colour or Mono Touch Screen with PLC for machine operation and showing various error messages and information on display
- Special Sensing system for checking missing label on product
- Low Compressed Air – Machine Stop with Alarm system for pneumatically operated coding system
- Visison System for checking Barcode, presence or absence of Coding or pharma code on labels
- Vision System with OCR system for checking coding on labels
- Online pneumatically operated product rejection system
- Turn Table and Packing Conveyor
Specification
Labelling accuracy | ±1mm |
---|---|
PLC | Programmable Logic Controller Unit – DELTA Make |
Touch Screen | Delta Make Touch screen |
Stepper Motor | Sanyo denki stepper motor – Japan make |
Servo Motor | Panasonic / Delta Make |
Microprocessor | Microprocessor controller by Bhagwati make |
Sensors ( Product / Label ) | Leuze – USA or Sick Germany make |
AC Drive ( Variable Speed) | Delta Make |
All Electrical / Electronic cables | Labb – Germany make |
Pneumatic cylinders | SMC / Festo make |
Label Height | 8 mm to 70/90/120/150 mm Standard* |
Label Length | 12 mm Minimum |
Label Roll Dia. | 300 mm |
Core Dia. | 75/76 mm |
Gap Between two Labels | Appx. 3 mm |
Product Size | As per customers requirements* |
Electrical | 220 VAC Single Phase Power Supply (50/60 Hz) |
Power | 2.0 Amp. |
Capacity | 0.75 Kw |
Speed | Up to 100 Labels per minute depending on Product and Label Size. The speed is also depending on stable movement of product on machine conveyor at higher speed. |
Conveyor height | 830-875 mm* |
Machine Direction of Movement | Left to Right from operator side |