Basic DesignShrink-Sleeve Label Applicator high speed incorporates latest shrink technology controlled through HMI (Human Machine Interface) unit and PLC (Programmable Logic Control) Unit. The complete unit is designed in house by company’s team of Design Engineer using advanced software and their core experience in Packaging Machinery. The bary centre and base of the machine have been designed to run this machine at high speed for long duration under stable and smooth operating condition.
- Automatic Bottle Feeding (or in line with other units) on the running conveyor of the applicator.
- Roll type sleeve loaded on the unwind station is built to hold heavy Sleeve Rolls.
- Web is unwound from the unwind unit through a unwind nip arrangement.
- Unwind nip pulls Sleeve and travels to the machine head where it is pulled by main feeding roller over the mandrel. (Mandrel is unique design for each size of container)
- Sleeve is then cut by rotary cutter assembly according to the Length predefined as per container height just below the mandrel & remains on mandrel till bottle arrives on the conveyor.
- Bottles are fed to the machine taking care for proper pitching and required feed worm assembly.
- An electronic sensor senses the presence of bottle under the mandrel and the precut sleeve is dropped over the container in position. This sensor enables the “No Bottle No Sleeve” feature of the machine.
- Bottles with the sleeve applied to the bottle in position exits the unit through the conveyor
|Production capacity:||21000b/h（take label length 80mmbottle type 500ml as norm）；|
|Bottle &can diameter:||φ28~125mm；|
|Main machine power:||6KW（220V，50HZ）|
- Whole machine adopt qualified stainless steel and good-quality of aluminum alloy , compact and reasonable fracture，convenient to adjust；
- The label roll frame of shrinkage film with adjustable device, convenient to adjust according to differ volume label 5″~10″paper tube.
- Simply installation, then can convenient for square and round bottle.
- No need of instrument, rotary mechanism is convenient to adjust, apply to different bottle type.
- Unique sleeve labeling method, adopt pressing sleeve labeling method, not only convenient but also reasonable.
- Control the feeding system automatically, and flat the shrinkage film and adjust strain simultaneity.
- Unique design knife plate, in the determined range, can change the knife base. Knife changing quickly and conveniently.
- Middle guide-pole clip system, mould changing quickly, no need any instrument.
- Label location system, can promote and demote in-phase adjust location according to specific bottle type requirement.
- Imported servo system and high-sensitivity photoelectric from Japan, with high cutting precision of label.
- Stainless steel electric control cabinet, Panasonic PLC, imported from Japan.
- Adopt advanced man-computer Interface auto controlling technology, key electric component all adopt international famous industrial brand.