Shrink Sleeve Applicator Machine description
Shrink sleeve labels are supplied from a roll in the form of a continuous web, unlabeled bottles are transported via an in-feed slat conveyor and then metered via a rotating feed worm screw. While the bottles enter the sleeve cutter parts and insert sleeve label / labeler moving past a trigger cell, the labels in web form are opened and formed into a tube by a mandrel, roller fed and cut in precise with a printed sleeve and applied to a bottle which is then conveyed up to a steam tunnel or electrical tunnel for filled bottle , if customer buy empty bottle shrink sleeve applicator then use Puck with rotating systems , pick is fixed with slat chain with gear , operator place bottle in puck then bottle going sleeve labels in web form are opened and formed into a tube by a mandrel, roller fed and cut in precise with a printed sleeve and applied to a bottle then after rotating bottle start 360 degree and going to hot air electrical tunnel to sleeving bottle and manually take up from conveyor for offline operation.
Label inserter and Shrink oven
The high-speed label inserter controls intermittently the film advance in precise registration with a printed graphic between two consecutive cutting operations.
The steam tunnel develops the heat required to shrink the sleeves and guarantee a perfect adhesion on the filled bottle.
Available model below :
- 60bpm Shrink Sleeve applicator with Electrical or steam tunnel
- 120bpm Shrink Sleeve applicator with Electrical or steam tunnel
- 200bpm Shrink Sleeve applicator with Electrical or steam tunnel
- 300bpm Shrink Sleeve applicator with Electrical or steam tunnel
Many industry demand Shrink Sleeve Applicator offer to wide range HDPE bottles, plastic HDPE bottle, packaging HDPE bottle, industrial HDPE bottle and HDPE bottles for dry syrup/suspension , agrochemicals products, bio pesticides, crop care products, crop fertilizer & crop insecticides. HDPE plastic bottles, printed HDPE bottles, HDPE rectangular bottles and HDPE triangular bottles,hdpe bottle for edible oil, plastic hdpe juice bottle with nozzle cap. Also offering balm bottle & cap, heavy vertical grooved flip-top cap for cream & pet bottle for edible oil,pet agro bottles, colored Hdpe bottles, plastic bottles, wide mouth Hdpe bottles and narrow mouth Hdpe bottles , toilet cleaner, hdpe bottle, hand wash bottle, aloe vera bottle, spray bottle.
Automatic Shrink Sleeve Applicator also called sleever, sleeve binder, label inserting machine, shrink labeler and even called sleeve labeling machine. The shrink sleeve applicator machine is used to apply or insert shrink sleeve label on the container , Plastic jars, Caps, Plugs, Twisters, Multilayer plastic container & jerry cans for applying heat shrinkable sleeve label or neckbands sleeve most suitable for food packages ranging from bottles, yogurt cups, margarine bowls and eye drop containers. Shrink sleeves can wrap and conform to a container’s every curve, enabling complete decoration of unusual shapes from top to bottom with 360 degrees. Shrink sleeves are widely used to decorate everything from foods, beverages, cosmetic, medical and even personal products like eye drop, lighter, marker pen.
Shrink Sleeve Applicator also called sleever, sleeve binder, label inserting machine, shrink labeler for pet bottle, syrup plastic pet bottle, pharma pet bottle, liquor bottle , coconut oil bottles, powder plastic bottles, lubricant oil plastic bottles, handwash plastic bottles and chemical plastic bottles , Plastic Containers / HDPE Bottles for Automotive Lube Oil, Agro-Chemicals, Edible Oil, Pesticides, Pharmaceuticals, Beauty, Cosmetic Industries.
Shrink-Sleeve Label Applicator high speed uses newest shrink technology with MMI and PLC base control panel. The bary centre and base have been accurately design, even use this machine with high speed for long time machine running still very stable and smoothly.
- jar are Automatically fed (or inline with other units) on the running conveyor of the applicator.
- Roll type sleeve should be loaded on the unwind station.
- Web is unwound from the unwind unit through a unwind nip arrangement.
- Unwind nip pulls film & get collected in the box from where it is pulled by main feeding roller on mandrel.
- Film is then cut by rotary cutter & remains on mandrel till bottle comes below it & dropped on it.
- Bottles are fed to the machine taking care for proper pitching.
- Bottles with the sleeve applied over the neck come out from the other side.
There can be some minor changes & modification in the Technical Specification for the best improvement of the machine, while designing as per your requirement.
|Sleeve Thickness:||Min 40 microns|
|Sleeve Applying Area:||Body Sleeving|
|Capacity:||Up to 60 jar per minute (Speed Depends on cut length)|
|Electric Supply:||3 Phase electric supply, connected load: 6.5 KW, 415 5 V AC, 50Hz Earth & Neutral.|
- Frame structure will be of S.S cladded and internal parts will be of M.S. Electrolysis Nickel plated.
- 0.5HP “Bontiglioli/Hindustan” makes geared motor for conveyor.
- “90 Watt Panasonic” makes geared motor for feed screw along with VFD.
- Variable frequency drive used will be of “Delta” make.
- 0.5 HP Drive – 1Nos.
- 0.25 HP geared motor for unwind unit.
- Eye mark sensor unit. (If printed sleeves are used)
- Perforation unit.
- Dancing unit will be provided for control the web tension.
- PLC used will be of “Delta” Make.
Floor Space Requirement:
Approximately 1mtr from all sides of the machine. Hence, clearance of 1mtr should be added to the actual size of the machine.
1 Skilled operator & 1 Semi Skilled.
- Bottles should be of good quality & dried.
- Sleeve should be of proper specification in Roll form.
- Operator should understand the working of the machine properly.